Description

STABILL PG-41 Snow White Finish Coat, 20 kg

is intended to make top quality white and smooth finish coatings on surfaces inside the buildings.

The product is a dry mix of natural gypsum, polymers and mineral fillers modified with high-quality additives.
When mixed with water, it forms a plastic, slow-setting, easy to use compound with good adhesion.
After application, setting and drying, it forms tough, scratch-resistant and a very smooth surface.
It can be finished with paints for mineral substrates, and covered with wallpapers.
Ultra-white colour and smoothness of the surface facilitates painting and can reduce its cost.

The specifications and instructions for use are given for the temperature of (23±2)°C and air humidity of (50±5)%.
The product properties may change in different conditions. Product complies with PN-EN 13279-1, type B2/20/2.
Awarded with the PZH Hygienic Certificate.

Composition: a mixture of natural gypsum, polymers and mineral fillers modified with additives
Mixing ratio of the product approx. 0.45 litres/kg

• Workable for 60 min
  Working temperatures from +5°C to +25°C
• Approximate coverage (with layer thickness of 1 mm) ca. 1.0 kg/m2
• Single layer thickness from 1 to 5 mm
• Compressive strength ≥ 2,0 N/mm2
• Flexural strength ≥ 1,0 N/mm2
• Adhesion ≥ 0,10 N/mm2
• Reaction to fire class A1
• Calcium sulphate content < 50%
• Usage: approx. 1 kg per 1 m2 with a layer thickness of 1 mm

20 kg bag or pallet = 54x 20kg = 1080 kg

If you require a higher or different quantity of this product, please contact us for a quote and to discuss your requirements, the best options and the lowest transport price. 

Delivery time on request