Description

EPS STYROPMIN Pro 100 036 Roof Floor, Flat, White, DP CS 0.036 W/(mK)

insulation boards

Styropmin EPS 100 036 provides more effective insulation than the standard white lambda 036 polystyrene. It also has very good compressive strength (>100 kPa). This means that the product can withstand a load of up to 3 t/m2. Choose solid and durable floor polystyrene from Styropmin!

The Styropmin EPS 100 036 product has a thermal conductivity coefficient of Lambda= 0.036 W/mK.

Styropmin DP CS PRO is perfect for insulating floors on the ground, roofs and ceilings. It can also be used under floor heating due to its hardness. To keep the heat in the house, you need to take care of solid insulation of the floor and roof. Good thermal insulation of external walls is not enough, many investors have already been convinced of solid roof insulation. Most heat escapes from the building through the roof, because it moves upwards. The house should also be well thermally protected from the ground side so that the floor heating is efficient. The Lambda coefficient of 0.036 W / mK will provide you with effective thermal insulation of the roof, ceiling and floor. The product can also be used to insulate terraces and balconies.

Floor polystyrene should be laid on the ground in at least two layers ‘in a staggered pattern’. In terms of compression resistance, this product withstands a pressure of about 3 t/m2. This allows it to be used in residential construction without any problems.

The DP CS 100 036 polystyrene is characterized by high density and hardness.

Application:

• floors on the ground in residential and public buildings with low loads
• floors on all types of ceilings with a rigid structure
• flat roofs with any waterproofing layer
• flat roofs in a full roof system
• terraces, balconies

Technical parameters:

• good thermal insulation: declared thermal conductivity coefficient (λD) ≤ 0.036 [W/(m•K)],
• bending strength ≥ 150 kPa,
• compressive stress at 10% deformation CS(10) ≥ 100 kPa,
• payload up to 3.0 t/m2
• reaction to fire: Euroclass E
• Length (mm): 1000
  Width (mm): 500
• Colour: White
• Texture: Flat
• Board thickness [mm]: Choose from 20, 50, 100, 120, 150, 200

Warranty: 10 years

If you require a higher quantity of a product, please contact us to discuss your requirements, the best options and the lowest transport prices. 

Delivery time on request